home *** CD-ROM | disk | FTP | other *** search
/ Columbia Kermit / kermit.zip / newsgroups / misc.19970104-19970326 / 000439_news@columbia.edu _Wed Mar 19 19:19:30 1997.msg < prev    next >
Internet Message Format  |  2020-01-01  |  4KB

  1. Return-Path: <news@columbia.edu>
  2. Received: from newsmaster.cc.columbia.edu (newsmaster.cc.columbia.edu [128.59.35.30])
  3.     by watsun.cc.columbia.edu (8.8.5/8.8.5) with ESMTP id TAA13732
  4.     for <kermit.misc@watsun.cc.columbia.edu>; Wed, 19 Mar 1997 19:19:29 -0500 (EST)
  5. Received: (from news@localhost)
  6.     by newsmaster.cc.columbia.edu (8.8.5/8.8.5) id TAA01621
  7.     for kermit.misc@watsun; Wed, 19 Mar 1997 19:19:28 -0500 (EST)
  8. Path: news.columbia.edu!panix!news-xfer.netaxs.com!cpk-news-hub1.bbnplanet.com!cam-news-hub1.bbnplanet.com!news.bbnplanet.com!howland.erols.net!newsxfer.itd.umich.edu!yale!oitnews.harvard.edu!purdue!mozo.cc.purdue.edu!wieland
  9. From: Jeff_Wieland@ces.purdue.edu (Jeff Wieland)
  10. Newsgroups: comp.protocols.kermit.misc,comp.os.cpm
  11. Subject: Re: Back to Basics II (Blank screen in CP/M kermit)
  12. Date: 19 Mar 1997 20:59:09 GMT
  13. Organization: Purdue University Agricultural Computer Network
  14. Lines: 68
  15. Message-ID: <5gpk2t$e0p@mozo.cc.purdue.edu>
  16. References: <5gki33$8qi@sun.lclark.edu>
  17. NNTP-Posting-Host: viking.acn.ces.purdue.edu
  18. Originator: wieland@viking.acn.ces.purdue.edu
  19. Xref: news.columbia.edu comp.protocols.kermit.misc:6771 comp.os.cpm:18653
  20.  
  21. In article <5gki33$8qi@sun.lclark.edu> miller@sun.lclark.edu (John Miller) writes:
  22. >I have loads of experience with kermit between vaxen, macs, and PCs.
  23. >None with my wife's Kaypro II.
  24. >
  25. >CP/M 2.2G
  26.  
  27. John,
  28. Is this a II or a 2?  Since you say it is booting 2.2G, I suspect that
  29. its really a 2-84, which is quite a bit different from the old II-83
  30. (althought important things like the IO port addresses for the serial
  31. data port are the same), especially since you mention port J4 and CP/M
  32. 2.2G (the G refers to the BIOS version -- my 2X came with 2.2H, which
  33. was the last release before the so-called Universal BIOS, 2.2U1).  
  34. (There were actually two versions of 2.2G -- you have to use DDT or 
  35. some other program to dump part of the BIOS to see which one you have.)
  36.  
  37. >Various kermits: 4.05 with adm3a, with vt52, 3.9A for Kaypro II, 4.09,
  38. >Thanks to Don Maslin.
  39. >
  40. >I'm not satisfied completely with the RS-232 I have set up - the breakout
  41. >box shows that some of the connections are not happy (RTS, CTS, DTR, etc),
  42. >but for the life of me I can't figure what is wrong with them, so on to the
  43. >empirical observation and puzzle.
  44. >
  45. >I have the serial I/O port J4 connected to a Supra 2400 B modem.
  46. >The modem shows TX/RD activity when I connect via kermit.
  47. >I can ATDT, log into unix and give commands, etc, and log out.
  48. >I can't see a blasted thing on the screen.
  49.  
  50. I used several different modems on my 2X, all with just a straight 
  51. through 25 wire cable.  Some of the modems I've used include an
  52. Avatex 1200, Hayes 2400, Microcom AX/2400, Telebit T1000, and Telebit
  53. WorldBlazer.
  54.  
  55. I'd be real suspicious that one or more of the line driver chips is 
  56. blown.  These chips convert between the TTL levels of the Z80 SIO and
  57. RS-232C levels.  I blew one or two of them on my 2X once, and I got
  58. really weird results with a breakout box.
  59.  
  60. Anyway, the '84 series Kaypros have 3 line drivers either two 1488's
  61. and one 1489, or two 1489's and one 1488.  If you open up an '84 Kaypro,
  62. they are near the back of the motherboard by the serial ports (if your
  63. Kaypro has two serial ports, called serial data and serial printer, then
  64. its a '84 series).  You could just replace them all, they're cheap.
  65.  
  66. >So it seems that CP/M is not passing the data into the kermit program.
  67. >I've read about IOBYTE, and dinked with the CONFIG program a little,
  68. >but no dice.  Please, no flames!  :^)
  69.  
  70. IOBYTE and CONFIG have nothing to do with this, because Kermit is 
  71. accessing the hardware directly.  There *IS* a generic CP/M 2.2 Kermit 
  72. that uses IOBYTE (you have to use STAT to set the RDR and PUN devices
  73. to point to the serial data port, and use CONFIG to get the baud rate
  74. set correctly).  This only works on machines that implement IOBYTE,
  75. which the Kaypro does.  It will not work at all under CP/M 3 -- there
  76. is a different generic Kermit for CP/M 3 that uses the AUX device.
  77.  
  78. >What's wrong here?  Do I need a newer CP/M?  (Are you listening Don? :^)
  79. >Is it a cable problem?
  80. >
  81. >Thanks,
  82. >John
  83. >-- 
  84. >"What's ahead?"
  85. >
  86. --
  87.                   Jeff Wieland
  88.                Jeff_Wieland@ces.purdue.edu